Historical Essay Topics About Slavery

Historical Essay Topics About SlaveryMany teachers and professors use historical essay topics about slavery to teach the historical details of American history. In a course on the American Revolution, for example, students would be well-served by devoting some time in their research to this topic. While the origins of slavery have often been a difficult subject to talk about in class, discussing the history of slavery is an opportunity to delve into the complexity of the subject.Teachers can easily find research questions that focus on specific historical periods, such as the Southern and Caribbean slave trade, the transatlantic slave trade, or the beginning of the African slave trade. Slavery often takes center stage in any history class, because of the presence of the largest institution of the time - the United States. The slave trade between Africa and the Americas also stands out in history classes, especially when considering the conflict that existed in the early colonies over its legality. By focusing on specific periods in American history, teachers can dig into the mind of the average American citizen, providing students with a better understanding of the day-to-day lives of those who lived in the past.Students and teachers may want to start by discussing how the end of the abolitionist movement in the 1850s helped push back against slavery. Of course, the United States has since banned slavery, but did that stop slavery from returning to the southern states? Did this activism set the stage for the struggle that finally led to the Civil War? Historians might also focus on how slavery affected the American history of religion and the Western frontier. In addition, historical research might examine the increased interaction between Native Americans and European settlers, the impact of industrialization, and the discovery of new land.One way to implement these historical essay topics about slavery is to include a class discussion about the topic. At the beginning of the semester, students will choose to attend a brief discussion about the subject, which is organized by the instructor. The discussion should not be so focused on one point of view, but rather should be a discussion of the many ways in which the subject has been handled historically. By understanding how the subject has been treated in the past, students can begin to formulate their own opinions.Once the topic is discussed, students can then begin to write an essay based on the historical essay topics about slavery. Students will be provided information about the proper format for their essay, including how to decide what topics to discuss and how to structure the essay. For example, some students might choose to write an essay about a specific period of history (such as the North and South's struggles over slavery), while others might choose to discuss one subject from several periods of American history. Some students might be interested in exploring a different aspe ct of the subject, while others might want to focus on a specific region of the country. The most important thing is that students write an essay that highlights their own personal opinions, or even an entire thesis.Historical essay topics about slavery, whether in a class or an essay, can be written in many different ways. Some students might want to focus on how the topic has been handled in history books, while others might want to discuss how the topic is being researched or discussed in classrooms. Students might also wish to address specific aspects of the subject, such as its place in the modern world, how it affects the human race, and how it is being used by those who profit from it. In order to do this, students should carefully consider how they are going to tell their story, as they need to make sure that the story tells a good one.Teaching students the historical essay topics about slavery provides them with the ability to read the facts objectively. The student can lea rn about the facts that make up the subject, including who was involved in it, why it happened, and how it was handled. Through this method, students are able to learn about the American history that may not have been as well-known in the past.

Sample Essay For a Physical Therapy Application

Sample Essay For a Physical Therapy ApplicationSample essays for a physical therapy application are required for aspiring physicians and therapists who are applying for physical therapy jobs. There are a lot of different requirements, but getting into the job market can be very difficult in today's economy. Without writing good samples you will not be able to survive and succeed.Most people are on the hunt for physical therapy jobs at any cost and without a bit of money you will have difficulty with these jobs. It does not matter what your education is, whether you are a college graduate or a high school graduate, or even if you went to grad school for less than a year you should know how to write a good essay on physical therapy. If you are a parent, your children would do fine as well because most of the time the people applying for this job are young children or elderly adults.There are so many applications for physical therapy that it is hard to know where to start, so the best t hing to do is to get yourself familiar with the different type of requirements for this type of job and how to write a sample essay on physical therapy. Let's take a look at the basic requirements of this job.First off you need to know that most colleges do not want anyone who has not completed their program in physical therapy for a degree before they will accept an applicant for this physical therapy job. As such, if you have not taken any classes in physical therapy at a college or university you should get yourself familiar with the different programs that are available and apply for the ones that match the requirements of your preferred physical therapy program.The next requirement for physical therapy is that you need to have an associate's degree, preferably a four-year degree or more. The reason for this is that most physical therapists who are looking for this physical therapy job have at least a Bachelor's degree.The final requirement for this physical therapy job is to be licensed or certified. You need to pass both the state licensing exams as well as the national certification exam before you can start work as a physical therapist. This means that you also need to have both a license and certification as a physical therapist in order to qualify for the physical therapy job you want.Writing a sample essay for a physical therapy application is a great way to get into the field of physical therapy and get yourself familiar with the requirements of this job. There are many great resources available for this and the job market and getting started is easy if you know how to start.

Viverra Motors Company Operations Management

Table of Contents Executive Summary Introduction Purchasing and inventory management differences Possible solutions to the problems Restructuring suggestions Conclusion References Executive Summary Operation management is a branch of management which deals with purchasing and inventory management. It also touches on design and overseeing various business operations. It is concerned with the steps that are necessary to supply chain management.Advertising We will write a custom report sample on Viverra Motors Company Operations Management specifically for you for only $16.05 $11/page Learn More Viverra Motors is a company that had committed some essential business operation errors. In order to circumvent these challenges the company’s purchasing and inventory systems should be adjusted. These adjustments will have far reaching effects on the future development of the company. The recommendations that will be provided in this paper include improv ing transportation and logistics, purchasing and inventory management. However, first of all, the company should reduce new acquisitions. In order to do this, the company should identify areas of competency and pay more attention to these areas. The company can also outsource the services that other companies can offer without compromising on quality. Introduction Operation management is a branch of business that deals with the movement of products through the production chain. It also deals with the processes involved in the acquisition of raw materials, as well as the processes that are involved into production of the end products. Major levels of operation management are strategic, tactical, and operational. Strategic level deals with all activities and decisions that go into production chains. It involves decisions concerning size and location of plants. Purchasing and inventory management differences Each dealership is supplied by a different supplier and deals with different s uppliers in the process of car production. Each dealership should therefore be strengthened to make decisions might have a positive effect on the process of car production.Advertising Looking for report on business economics? Let's see if we can help you! Get your first paper with 15% OFF Learn More Each supplier has its own strengths and weaknesses and the company’s dealerships should deal with the suppliers on an individual basis. As a consequence, each dealership of a company should design a unique supply chain management system to fit its current position (Cooper Ellram, 1993). The core areas of operation management are: Supply Chains—this involves the management of all aspects of management that are involved into providing goods to customers. The emphasis is laid on the processes of acquisition of raw materials to the end of a products’ life. All the stages that go into the product life cycle (introduction stage, growth, maturity, saturatio n and decline stages), including disposal, are considered. Operation Management/Marketing Interface—this is concerned with finding out what the customers like and see as important. This is necessary to produce what the customers want. Operation Management/Finance Interface — this is an area that comprises of the cash value of the company. It roughly estimates the financial worth of the firm. Service Operations — this consolidates the characteristics of services that go into production. Operations Strategy — this lays down the strategies the company will follow in production. It should agree with the overall strategies of the company. Process Design and Improvements — this manages all the innovations within the company. All the innovations are protected by this section of operation management. It also seeks financial assistance for the innovations. All these activities can be broadly classified as follows: Strategic level includes such aspects Th e number, location, and size of warehousing and other facilities needed by the company. Development of partnerships as the desirable arrangements with suppliers, distributors, and customers. Creating effective communication channels. Controlled product life cycle management. Where and when to buy products. Agreeing all the strategies of the company. Tactical level suggests such actions Finding contracts for the company. Decisions involving scheduling and planning of production. Customer satisfaction decisions Transport and logistics decisions Knowing the competitors Operational level suggests Planning production and distribution Scheduling- for all manufacturing plants of the company. Estimating future demand. Managing inventory- receiving and storage of stock Accounting for system failures and leakages Weaknesses of current purchasing and inventory management Reliance on forecasts: The current purchasing (procurement) system of the company is over reliant on forecasts whic h are based on the past trends. While this is a good practice, it is worth noting that the quality of the results obtained is highly dependent on the quality of data used to generate them. Employee competence often influences the quality of forecasts. In order to solve this problem, mechanisms to train employees should be put in place. Excessive focus on reducing costs: Viverra motors is interested in supporting its â€Å"one price – lowest price† concept. Focusing solely on this concept is a potential area of weakness. This may encourage the purchasing managers to choose price over quality. Low priced service parts may not meet the customers’ expectations. If this happens, the customer might end up in spending more in the long run. This has the potential to damage the reputation the company has worked hard to gain. This concept is a good concept, but if not executed correctly, it can permanently damage the reputation of the company.Advertising We will writ e a custom report sample on Viverra Motors Company Operations Management specifically for you for only $16.05 $11/page Learn More Unplanned acquisition: The new acquisition appears to have been hurried and not well planned. It is the fourth dealership in a metropolis of over one million people. The nature of the new dealership makes it difficult for Viverra motors to maximize profits. The company relies on fast movement of goods and high volume of sales to make profit. The new â€Å"auto-supermarket† requires more space because it deals with more than one make of car. This can also bring undue competition to existing dealerships of Viverra motors. This competition can arise if the new dealership will focus on the production of stock cars and service parts which are already being sold by other dealerships. Economies of scale will be hard to realize in such a setting. Poor selection of suppliers: The system is currently relying on a great number of supp liers. This is a potential danger for the company. Each supplier has its own way of doing things and the company may suffer a setback when it has to deal with many suppliers. It may slow down the progress of the company. Increased cost of running business: cost of running business will keep going up as the company increases the number of dealerships and products in each dealership. More products require more space. The company is already experiencing financial constraints brought in by the new dealership. Poor location design: The metropolis has a population of one million people. There is an additional half a million people outside the metropolis (Masters, 1993). This gives the company an estimated target customer population of one and half million people. This total population is not commensurate with the number of dealerships in the metropolis. Acquiring new dealerships will saturate the market leading to decreased volume of sales.Advertising Looking for report on business economics? Let's see if we can help you! Get your first paper with 15% OFF Learn More Possible solutions to the problems In order to circumvent the problems mentioned above, the following recommendations should be considered. Outsourcing: the company should outsource some of the activities that do not constitute its core business. This will enable the company to focus on key competencies while letting others do some things on its behalf. The company should identify companies that can provide services of the required quality at a lower cost. Services such as warehousing can be outsourced. The company is experiencing shortage of space, and it means that partners should be sought to provide this crucial service. This will ensure that Viverra motors saves money that can be used to finance the core business. Provision of service parts can also be outsourced to a reputable partner. However, since the company has gained a good reputation in servicing and repairing vehicles, it should retain it. This aspect of the business is crucial to the company as it attracts new custome rs and helps retain existing customers. Outsourcing is critical to any company as it enables it to run the business effectively and efficiently. Co-owning: instead of acquiring new businesses, the company can opt to buying some stakes in companies it is interested in. Viverra motors should have acquired some shares in the new dealership as this would have enabled it to share logistics management and inventory management responsibility. Each partner would then bring in its key competencies and enable the dealership to move to great heights in terms of customer service and profit maximization (Lee, and Billington, 1993). Focus on quality: the company should focus more on customer satisfaction and quality of services offered (Ketchen, Hult, 2006). The quality of the products and services should meet or exceed customer expectations at all times. Focusing on cost of the end product only diverts attention from the customer. This may result in a situation of self preoccupation. Customers do not want to deal with companies that are preoccupied with self image. Just- in- time inventory management: the company has run out of space, thus it is in a great need of using innovative methods of inventory management. A lot of expenses will be reduced if the company does not hold stock for long (Cooper, Lambert, Pagh, 1997). Just-in-time is system of inventory management that ensures a company does not stay with any particular stock longer than it is necessary. This system enables a company to order stock just before it is needed. After stock is received, it spends a short time in the company’s warehouses thus reducing cost of warehousing and creating a room for new orders. This system requires very accurate forecasts and reliable suppliers. If the suppliers are not reliable, then the company will not incur the cost of missing the stock. This cost can be huge and make a great damage to a company (Cohen, and Lee, 1989). This system also ensures that the time a product s pends in the supply chain is shortened. Money saved can be used to run other aspects of the business. The system will also encourage the company to invest in what the customers want and, as a consequence, minimize the wastage. Supplier selection: Viverra motors can benefit from careful selection of suppliers. A thorough research and background check of the suppliers will enable the company to establish a partnership with reputable and reliable suppliers (Mentzer, 2001). Some suppliers may provide products cheaply but, at the same time, with inferior quality. Some may provide high quality goods but at a very high cost. Both situations are undesirable for Viverra motors. Viverra motors should aim at striking a balance between cost and quality of products. The suppliers who are reliable are selected. Transport and logistics: efficient transport and logistics systems should be put in place. This ensures that the amount of time spend on movement of products along the supply chain is sign ificantly reduced (Rainbird, 2004). This will reduce operating costs in the long run. This can either be done through outsourcing these activities or through improvement of existing systems. If necessary, the company can put in place radio frequency identification system (RFID). This system will enable purchasing managers to monitor the movement of stock in real time. However, this system may be expensive to install and run. It may require additional training for the users. Restructuring suggestions As Viverra motors prepares itself for the future, both current and expected customer expectations should be put in perspective. Future aspirations of the company should be in line with the expectations of its customers (Greenberg, 2002). Viverra motors should estimate the number of customers it intends to serve in the future. This can be calculated using past customer numbers. The managers can work out the rate of annual increment in customer numbers and use it to forecast the future num bers at any particular time in the future (Houlihan, 1985). In order to meet the current customer demands and move into the future with ease, the following structural changes may be implemented. Know Customer: Viverra motors needs to invest in research in order to understand its customers better. Each customer is unique but some share common traits. Investing in this research will enable the company to provide what the customers want at the right time. Customers will be divided into various customer segments or, in other words, market segments. Each segment gets unique products and attention depending on the need of customers. Market segmentation is a great marketing tool. Products are marketed differently to different groups. Continual Rapid Improvement: the company should continue improving its products and services to meet current customer demands. The company can invest in self improvement techniques. The improvement should be comparable with changes in customer demands. Unifie d Purpose: all the dealerships, though, representing different brands and segments of the market should have a unified goal. All the dealerships need to work together as a team to achieve a common goal. Unity purpose helps reduce potential conflicts in the company. Know the Competition: the company should invest in mechanisms to know its competitors. This is because modern completion fronts are in the supply chain management. Viverra motors should use this to structure its supply chain management to be in line with that of its partners. Focus: the focus of the company should be changed. The company should avoid focusing so much on acquisitions. It should instead shift the focus to customer satisfaction and profit maximization. Organize Resources: resources should be organized in such a way that the most urgent and most important obligations are met in the first place. Invest in Human Resources: the company should focus on hiring new staff in areas that are critical to the operation of the company (Ballou, 1992). Staff should be reduced or completely relieved of their duties in areas that the company can outsource the services. Maintain Equipment: the company should maintain existing equipment in order to ensure that their after sales service segment works well. The company can also invest in new equipment to boost its repair services. Cut Flow Time: the company should cut the time a product spends in the supply chain. This can be done through development of systems that can help minimize wastage and maximizes on the available time. Visibility Management: Viverra motors needs to invest in brand visibility. It should strive to be more visible in the market than its competitors. This may be translated to increased customer numbers hence increased revenue. Conclusion This paper is focused on the operation management that is implemented in the Viverra motors and the ways of its improvement. Having analyzed a number of researches on the given topic, as well as a Ca se Study, we have come to a conclusion that Viverra motors should position itself for the future. In order to do this correctly, several structural adjustments need to be implemented. The company needs to adjust its purchasing and inventory systems to match with those of its customers. Some of the changes that have been suggested earlier in this paper include slowing acquisition. The company should instead focus on co-owning. The company should also invest in logistics and transportation systems. References Ballou, RH 1992, Business Logistics Management, 3rd. Edition, Prentice Hall, Englewood Cliffs, NJ. Cohen, MA Lee, HL 1989, ‘Resource Deployment Analysis of Global Manufacturing and Distribution Networks’, Journal of Manufacturing and Operations Management, vol. 2, pp. 81-104. Cooper, MC Ellram, LM 1993, ‘Characteristics of Supply Chain Management and the Implications for Purchasing and Logistics Strategy’. The International Journal of Logistics Managem ent, vol. 4 no. 2, pp. 13-24. Cooper, MC, Lambert, DM Pagh, J 1997, ‘Supply Chain Management: More Than a New Name for Logistics’. The International Journal of Logistics Management, vol 8, Iss 1, pp 1–14. Greenberg, D 2002, ‘Just-In-Time Inventory System Proves Vulnerable to Labor Strife’, Los Angeles Business Journal. Web. Houlihan, JB 1985, ‘International Supply Chain Management’. International Journal of Physical Distribution and Materials Management, vol. 15 no. 1, pp. 22-38. Ketchen JrG Hult, TM 2006, ‘Bridging organization theory and supply chain management: The case of best value supply chains’, Journal of Operations Management, vol. 25 no. 2, pp. 573-580. Lee, HL Billington, C 1992, ‘Supply Chain Management: Pitfalls and Opportunities’, Sloan Management Review, vol. 33, pp. 65-73. Lee, HL Billington, C 1993, ‘Material Management in Decentralized Supply Chains’. Operations Research, vol. 41 no. 5,pp. 835-847. Masters, JM 1993, ‘Determination of Near-Optimal Stock Levels for Multi-Echelon Distribution Inventories’, Journal of Business Logistics, vol. 14 no. 2, pp. 165-195. Mentzer, JT. et. al. 2001, ‘Defining Supply Chain Management’, Journal of Business Logistics, vol. 22, no. 2, pp. 1–25. Rainbird, M 2004, ‘A Framework for Operations Management: The Value Chain’, International Journal of Operations and Production Management, vol. 34, no. 3/4, pp. 337–345. This report on Viverra Motors Company Operations Management was written and submitted by user Simone Potts to help you with your own studies. You are free to use it for research and reference purposes in order to write your own paper; however, you must cite it accordingly. You can donate your paper here.

Furniture Styles French Empire, English Regency, and American Classical. Revival essayEssay Writing Service

Furniture Styles French Empire, English Regency, and American Classical. Revival essayEssay Writing Service Furniture Styles: French Empire, English Regency, and American Classical. Revival essay Furniture Styles: French Empire, English Regency, and American Classical. Revival essayThe French Empire furniture (1805-1830) style differs from other styles, has its characteristic features which were so common for Napoleon’s period. This style is massive and noble. Napoleon’s passion to majesty marked furniture style of that time: small pieces almost disappeared, massive items with flats surfaces and flat corners prevailed. Empire tables used to be the most notable feature– massive and round, they served as dinning tables. Several new pieces of furniture appeared: such as boat beds decorated only on one side, the office Minister desk, psyche mirrors, boat beds with one-side decoration and others. The peculiar features of the furniture were heavy stable legs, marble tops, lack of moldings and bronze fittings. The main wood was mahogany, however, beech, boxwood, marple, olivewood, burled elm and walnut were also used. Napoleon wanted to have the sign of his vic tories and imperial grandeur even in furniture, so it often had ornaments with military trophies, Napoleon’s emblem, his monogram, etc. The main furniture maker of that time was George Jacob. Together with his brother he organized the family furniture workshop in 1786 and realized Napoleon’s orders and desires. He specialized on the production of veneered case-pieces and seat furniture.English Regency is a style in furniture which prevailed in England in the period of 1811-1820 and is known as the period of George IV, the Prince of Wales and regent of   that period. It was the time of restoration of ancient tendencies in furniture: inheritance of Roman and Greek times. It was classical furniture with classical decorations: lion heads, animal legs, Roman Gods, griffins, etc. The most popular item of that period is a chair. Chairs made of mahogany and rosewood were really fashionable. They used to have horizontal lines, high set arms and concave front legs. Sofas and c ouches were popular, as well. Moreover, the couch was the creation of the Regency style and was used as day-bed.George IV had great influence on furniture production and the craftsmen of that period that is why this furniture style got the name after him. He became Regent in 1811 because of his father’s insanity and in three years he spent an enormous amount of money just on furniture – about  £160,000. He collected rare pieces of Dutch masters.Influential designers of that period were George Smith, Henry Holland and Thomas Hope. Hope was that designer who adopted Egyptian and Greek ornament into the English furniture and presented his ideas in his work Household Furniture and Interior Decoration (1807).American Classical Revival as the furniture style was widespread in America starting from 1815. This tendency came from Europe, however, it had its peculiar American features. Furniture items were bulky and massive – it was also inheritance of ancient Greek and Roman tradition. The main characteristic features of the American Revival are the following: bronze or marble decorations, bold carving, scroll-shaped legs which resembled animal paws, heavy pedestal bases, classical motifs, heavy geometric shapes, etc. The most notable pieces of this period are Klismos chair, scroll-end sofa and settee, canopy beds. In America it was the period of rapid industrialization and it had influence the furniture industry, of course. Machinery allowed producing and selling furniture items for reasonable price, which conditioned the quick and wide development of American Classical Revival. Among remarkable designers of that style are Charles-Honorà © Lannuier, an immigrant from France, and Duncan Phyfe. He introduced gilded caryatids on chairs and table underlining elegance of that style. Mahogany was used, as well.To sum up, despite the fact that all three furniture styles (French   Empire, English Regency, and American Classical Revival) have a lot of in common, they have a lot of distinguishing features due to the national peculiarities.

Defines Atom Essay Example | Topics and Well Written Essays - 1750 words

Defines Atom - Essay Example Even the books read by students are comprised of atoms. If everything in the world could be divided into the smallest piece possible, it would all look like an atom. It would be very difficult to place atoms in one category of life as they are everywhere and a part of everything around us. The knowledge of atoms has been used in both good and bad things in life. For example, some scientists have used this knowledge to create dangerous weapons such as the atomic bomb. However, the world has tried to reduce the dangers of such weapons by maintaining peace and certain programs that involve countries destroying their nuclear weapons. As mentioned above, several things around us can be broken down to atoms and they are many benefits associated with the knowledge of atoms. In fact, we cannot do anything that does not involve us interacting with elements that contain atoms. Like different elements around us, human bodies have their own equivalent to an atom. Humans are made up of organ syst ems such as the system that allows us to breathe, the system that allows blood to move all over our bodies and the system that allows us to think and respond to things around us. ... However, another interesting factor is that cells themselves are also similar to elements in the sense that they can be divided into macromolecules, which can be divided into molecules. And guess what†¦ these molecules can also be divided into atoms. This has been described by scientists as the organization of life. In more precise terms, a cell can be defined as the basic functional, biological and structural unit of organisms that are classified as living. A cell is often defined as the building block to every living organism. Biologically, the cells have been defined by a scientific theory known as the cell theory. This approach illustrates the properties and structural components of a cell. There are three main components in the cell theory and these include: living organisms of comprise of 1 or more cells; fell on derived from living pre-existing cell and the cell is the most basic functional, organizational and structural unit of all oral living organisms. In addition, cel ls can also be divided according to the living organism into eukaryotes or prokaryotes. These each have different morphological features including the intracellular components. The atoms in elements can be differentiated by their different nuclear and electronic properties which influence the reactions and characteristics of each element. Human cells on the other hand, are different morphologically in order to suite their particular purposes. Examples of cells include cardio myocytes, neurons, hepatocytes and pneumocytes which all have specific functions in different organs. As mentioned above, different cells can be different in their intracellular

Computer Crimes Essay Example | Topics and Well Written Essays - 500 words

Computer Crimes - Essay Example A foreign terrorist, who launched the attack to cause billions of dollars in damage to the U.S. economy, is pointing towards the incident of 9/11 on The World Trade Center in America. America suspects that the attack on World Trade Center was a pre-planned assault by the foreign terrorists. Foreign terrorist with the help of computer gets the details of the plane and moreover programmed the plan in a matter that it's all breaks get failed, the satellite settings for the plane to give signals on airport were cut off and nothing can stop the plan from hitting the twin tower, the World Trade Center at day time when the building was in full bloomed with people. This hit not only damages the buildings and gave the loss of billions of money but also destroys the number of American families. This was a crucial computer terrorism spread all over the world. Criminals for such kind of crimes should not only stay far from the computer but they should stay away from their loved ones as they sepa rate many American family members. They must be kept in the jail for all life long in a place where they can’t see the world or can hear what is going around. To cure from such crimes, state should be strict before allowing immigrants to pass the immigration for the country.

Post 6 Essay Example | Topics and Well Written Essays - 500 words

Post 6 - Essay Example In case the land is not for sale, I would try doing this business myself. On the part of the agencies responsible for the protection of wildlife, this is like going so far in the attempt to safeguard the rights of the animals that the rights of humans start getting violated. So I would also like to call a press conference emphasizing that the agencies protecting animals’ rights need to review their practices as they have started to protect animals’ interests on the cost of humans’! It is time that the fundamental superiority of humans over animals is acknowledged and this principle be referred to in cases of mutual interest between humans and animals. My first classmate has made a wonderful reply to the question by bringing into light the potential negative ways in which certain animals that humans tend to protect affect humans. I am impressed with the detailed discussion of the real-life examples of bats and minnow that my classmate has cited. I totally agree that the wildlife protecting agencies should consider the extent to which saving certain species on the cost of humans’ interests is beneficial for the environment. I also agree that any individual in possession of such a piece of land should be compensated by the government. My second classmate has offered a number of amicable solutions that may be considered to have the land owner compensated without causing any harm to the endangered green-toed guttersnipe lizard. Sure enough, the first and the foremost reaction of every person would be extreme anger and irritation. It would be the first priority of any sensible person to get rid of such property. It’s quite sensible as well to consider offering the land to the government for tax exemption if the sale is not possible. I am particularly impressed with my classmate’s idea of bringing a premade house into